How to Change Mileage for Maserati Levante Geberit President by CGDI BMW

 This post will show how to change mileage for Maserati using CGDI Prog BMW MSV80 Key Programmer via OBD. You can modify mileage to less or higher. It applies to Maserati Levante 95320, Geberit 95160 and President 95160.

Here take Levante 95320 as an example.

In order to make the operation for watching clearly, has already removed the dashboard from Maserati car.

Connect CGDI BMW key programmer to the dashboard via main cable

   

The original mileage on the dashboard is 95239 km now.


Then run CGDI BMW software

Select “Maserati Change KM”-> “Read mileage information”

When the original data has been read out, and then save it.




Note: The mileage is little different from the dashboard, it is ok.

Select “Modify mileage”

We can modify mileage to less or higher, then input the new mileage you desire (the value should be between 0 and 999999).

e.g. change the mileage to 12345 km




Change the mileage to 258765km

 


Both can be reset successfully, there is a little difference from the dashboard, but it is ok.



That’s all! Hope it helps!